REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
			Technical data
			Checking the tightness of the cooling system
			Checking coolant density
			Ribbed Belts
			Tubes and pipes of the cooling system
			Water Pump Engine SOHC
			The water pump of engine DOHC
			Radiator
			Radiator cap
			Thermostat SOHC engine
			Thermostat engine DOHC
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

Checking the tightness of the cooling system

PERFORMANCE ORDER

1. Wait until the heat sink has cooled down to a temperature of 38 ?� C, remove the radiator cap, and instead connect the device to check the tightness of the cooling system.
2. Create a pressure of 139.3 kPa in the cooling system.
	3. Ensure that the pressure of 139.3 kPa in the cooling system is maintained for 2 minutes.
A warning Do not remove the radiator cap on a hot engine, as the departing couple may result in severe burns. Close the radiator cap thick cloth and slowly remove the lid until the hiss of escaping steam. After the termination of the steam outlet slowly unscrew and remove the cap from the radiator.
4. If the leak and fix it.

« previos page
Technical data