 printable version
High voltage wires
Improper installation location and high-voltage wires can lead to overshoot sparks with the wire or "weight", which in turn could lead to misfire and reduce the engine speed when driving at high speed. Therefore, install the high-voltage wires properly, as shown in the figures.
Check | - Disconnect the high-voltage wires from candles and ignition coils. Clean and check the insulation of high-voltage wires. Check the internal surface of the contact high-voltage wires for corrosion or fouling.
- Ohmmeter measure the resistance of high-voltage wires.
High voltage wires | | Cylinder | ?��1 | ?��2 | No. 3 | ?��4 | | Length mm | 560 | 440 | 360 | 310 | | Resistance (BOUGI), Ohm | 2,51-3,76 | 1,97-2,96 | 1,61-2,42 | 1,39-2,08 | | Resistance (R16AIPS), Ohm | 5,60-11,76 | 4,40-9,24 | 3,60-7,56 | 3,10-6,51 |
 | The resistance of the high-voltage wires must not exceed 10 000 ohms, otherwise replace the wire. |
|
|
|
