REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Magentis
		Engines
		Lubrication System
		Cooling system
		The control and toxicity
		Fuel system
		Ignition system
		Coupling
			Technical data
			Bleeding the hydraulic clutch
			The clutch pedal
			Master Cylinder, clutch pipes and hoses
			Clutch Master Cylinder
			Clutch slave cylinder
			The housing and clutch discs
			Troubleshooting
		Transmission
		Power shafts, axles
		Suspension
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

printable version

The clutch pedal

Withdrawal

PERFORMANCE ORDER

1. Remove the cotter pin, washer and a pin with a head and a hole for the pin.

2. Remove the bolt from the clutch pedal.

Check

PERFORMANCE ORDER

1. Check the pedal arm and the sleeve for wear.
2. Check the clutch pedal in the absence of bending and deformation.
3. Check the return spring for damage and loss of elasticity.
4. Check the clutch pedal pad for damage and wear.

5. Remove the ignition lock switch and check for continuity between the terminals of the connector.

Setting

PERFORMANCE ORDER

1. Before installation, lubricate the clutch pedal bushing.

Lubricant: SAE J 310, NGLI ?��1

2. Screw the mounting bolt of the clutch pedal.

3. Before installation grease sleeve, pin, washer and a pin with a head and a hole for the pin.

Lubricant: SAE J 310, NGLI ?��2

4. Install the pushrod to the clutch pedal.
5. Adjust the length of the pusher.

« previos page
Bleeding the hydraulic clutch

next page »
Master Cylinder, clutch pipes and hoses