REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Magentis
		Engines
		Lubrication System
		Cooling system
		The control and toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Power shafts, axles
		Suspension
		Steering
			Technical data
			Check of a free wheeling of a steering wheel
			Checking steering angle of front wheels
			Checking the steering wheel return to its original position
			Check torque pin of the spherical rod end
			Check the fluid level
			Liquid replacement in a hydraulic drive power steering
			Bleeding the hydraulic system of the power steering
			Checking the belt drive power steering pump
			Checking the fluid pressure in the hydraulic system
			The steering column / steering shaft
			Steering transfer of cars with power steering
			Power steering pump
			Power steering hoses
			Electronic power steering
			Troubleshooting steering
			Troubleshooting steering EPS
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

printable version

Liquid replacement in a hydraulic drive power steering

PERFORMANCE ORDER

1. Lift the front of the car and fix on supports.
2. Disconnect the return hose from the tank.
3. Connect an additional hose to the return hose, and drain the fluid into a suitable container.
4. Disconnect the high-voltage wire from the ignition coil. Periodically turn the starter and at the same time some times turn a steering wheel from lock to lock to drain all liquid from the hydraulic drive power steering.
5. Connect to the reservoir return hose and fill the tank liquid is recommended.
6. Bleed the hydraulic power steering.

Type of fluid power assisted steering: PSF-3
Liquid volume: 1.0 l

« previos page
Check the fluid level

next page »
Bleeding the hydraulic system of the power steering