 printable version
Technical data
The main brake cylinder | | - type | Tandem | - Bore mm | | CBS | 23.8 | | ABS | 25.4 | Vacuum brake booster | | - type | Vacuum | | - Effective diameter, mm | | CBS | 177.8 | | ABS | 203.2 | | - ratio | | CBS | 7.0: 1 | | ABS | 7.5: 1 | The pressure | | - Start pressure, MPa | 3.43 | | - The ratio of decompression | 0.32: 1 | Front brakes | | - type | Disk, ventilated | | - The diameter of the brake disc, mm | 257 | | - The thickness of the brake disc, mm | 24.5 | | - Brake pad thickness, mm | eleven | | - Bore mm | 57.2 | Rear drum brakes | | - The inner diameter of the brake drum, mm | 228.6 | | - Brake pad thickness, mm | 5 | | - Bore mm | 19,05 | Rear disc brakes | | - The diameter of the brake disc, mm | 262 | | - The thickness of the brake disc, mm | 10 | | - Brake pad thickness, mm | 10 | | - Bore mm | 34 | | Anti-lock brakes | The control unit ECU | | - Supply voltage, V | 10-16
| | - Temperature range, ?� C | - 40 ... 110 | Control lamp: W / ABS, TCS, TCS OFF, EBD | | - Supply voltage, V | 12 | | - Current consumption, mA | 80 | Wheel speed sensor | | - Resistance, Ohm | 1275-1495
| | - Output voltage, V | 0,15-50
| | - An air gap, mm | 0.2-1.2 | Hydraulic block HECU | | - Weight, kg | thirty
| | - engine | 12, 35 A
| | - Engine power, W | 180
| | - Productivity in cm 3 / s | 5.5 |
Adjusting data Installation height of the brake pedal, mm | 176 ?� 0,3 | | Clearance brake light switch, mm | 0.5-1.0 | | The free pedal travel, mm | 3-8 | | The distance from the brake pedal to the floor, mm | 44 | | The gap between the brake servo pushrod and the brake master cylinder, mm | 0 | | Progress parking brake lever while tightening its force 196 N | 8-9 clicks | | Minimum thickness pads front brake pads, mm | 20 | | Minimum thickness of a brake disk, mm | 22.4 | | Palpation of a brake disk, mm | 0.08 | | The minimum permissible difference in the thickness of the brake disk, mm | 0.01 | | Minimum thickness pads rear brake pads, mm | 15 | | The maximum diameter of the bore of the brake drum, mm | 229.6 | | The maximum allowable gap in the working piston brake cylinder, mm | 0.15 | | Minimum thickness pads rear disc brake pads, mm | 20 |
Lubricants | brake fluid | DOT 3 or equivalent | | Bushing and bolt of the brake pedal | Lubricant SAE J 310, NLGI ?��0 | | The pin head and the cotter pin hole | Lubricant SAE J 310, NLGI ?��2 | | The contact surface of the base plate | The lubricant for the bearings NLGI ?��0 | | Movable elements ratchet or pawl ratchet. | Lubricant SAE J 310, NLGI ?��2 |
Tightening torques, N ??? m Nuts of fastening of the main brake cylinder to the bracket | 8-12 | | Nuts bracket brake master cylinder | 13-16 | | Fitting the vacuum hose to the air expansion chamber | 15-18 | | Bleeder valve | 7-13 | | Connecting the brake pipe nuts | 13-17 | | The pressure to the master cylinder | 35-55 | | Bolt the caliper guide bushing | 22-32 | | Caliper mounting bolts to the steering knuckle | 69-85 | | Banjo bolt brake hose for Front Caliper | 25-35 | | Bolts of fastening of the working brake cylinder | 12-18 | | The front wheel speed sensor | 8-9,5 | | Rear wheel speed sensor | 15,5-16,5 | | Bolts control unit ECU and Hydraulic block HECU | 8-10 | | Bracket bolts of the control unit ECU and Hydraulic block HECU | 9-10 | | Six brake pipes to the hydraulic unit | 13-17 |
|
