1. Set the selector lever to position "N".
2. Transmission loosen the nut to the cable management arm to free the cable and lever.  | 3. Set the gear lever to the neutral position. |
 | 4. Loosen the mounting screws of the switch housing the transmission range, and then turn the switch housing the transmission range so that align the hole at the end of the control lever and the hole in the switch housing ledge transmission range. |
5. Tighten the mounting screws of the switch housing ranges gearbox torque listed in the specifications. Be careful when tightening the screws not to displace the switch housing.  | 6. Gently push the transmission control cable in the direction of the arrow, and then tighten the adjusting nut. |
7. Check that the selector lever is in position N.
8. Check the operation of the switch and for each position of the selector lever. | 
