printable version

Screen wipers and washer

Windshield Wipers

Ignition must be on. To turn the wipers move the shift lever cleaners down.

INT - Intermittent operation. 1 - including normal speed. 2 - including an increase in speed.

One cycle of the wiper

To perform a cycle of wiper move the shift lever forward cleaners and release it. The lever will return to the OFF position.

In order to prevent damage to the wipers or windshield cleaners do not turn when the windshield dry.

In order to prevent damage to the wiper rubber brush, do not use brushes to clean the brushes or near gasoline, kerosene, paint thinner, or other type of solvents.

To prevent damage to the levers or other parts do not move the wipers by hand levers and brush cleaners.

The car is equipped with one of two types of washers. To activate the washer must be turned on the ignition.

To activate put the washer on the shift lever and hold in this position. To turn the wipers move the shift lever cleaners down.

If the washer does not work, check the washer fluid reservoir. If insufficient, add fluid to the reservoir.

Do not use the washers at low temperatures without heating the glass heater. Washer fluid could freeze on the windshield and restrict visibility.

In order to prevent damage to the washer pump does not turn washers if the washer reservoir is empty.

Windshield wiper and washer, rear window included pressing the corresponding button. For simultaneous operation of wiper and washer, press the lower button. To activate the cleaners just click the top button.