REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
			Front suspension
			Rear suspension
				Design Features
				Troubleshooting rear suspension, their causes and remedies
				Removing and installing strut rear suspension
				Repair strut rear suspension
				Replacing the top support strut rear suspension
				Removing and installing the trailing arm and repair
				Removing and installing wishbone and repair
				Replacement parts stabilizer bar rear suspension
				Replacing the rear hub
				Replacing the wheel mounting studs
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

printable version

Replacing the rear hub

You will need: face head "32", an extension cord, knob, flat-blade screwdriver, piercer, a chisel, a hammer.

1. slow down the car and set the parking brake, wheel chocks ("shoes") under the wheels. Loosen the wheel nuts from the removable hub. Raise the jack back of the car and establish it on support. Remove the wheel and lower the parking brake lever all the way down (the car disinhibited).


2. Remove the brake drum (see. "Replacing the brake drum").	3. Easy blows of a hammer on chisel end press out evenly around the circumference of the hub cap ...


4. ... and remove the cap.	5. beard raskontrite hub nut.


6. Loosen the nuts of the hub of the rear wheel to the pin fist.	7. Finally, unscrew the nut rear hub ...

8. ... and remove the rear wheel hub.

9. Install the parts in reverse order, with the following:

- Tighten the hub nut torque 180-220 Nm;

- After tightening the nut the hub Tighten it as shown in the photo.

« previos page
Replacement parts stabilizer bar rear suspension

next page »
Replacing the wheel mounting studs