REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Design Features
			Replacement bumpers
			Removal and installation of a mudguard and front wheel arch liner
			Removing and installing the rear wheel mudguard
			Removal and installation of a forward wing
			Removing and installing bonnet
			Door
			The trunk lid
			Removal and installation of facing the boot
			The fuel filler flap
			Seats
			Supplemental Restraint System
			Rear view mirrors
			Dashboard
			Removal and installation of the instrument panel
			Heater and air conditioning
			Interior fittings
			Replacing a windscreen
			Care body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Removal and installation of a mudguard and front wheel arch liner

To remove the front wheel mudguard you need a screwdriver with a flat blade and Phillips

1. Poddomkratte car on the appropriate side.


2. Remove the plastic retainer rear mudguard fixing ...	3. ... and remove the cap.


4. Similarly, remove the two pistons of the front fastening ...	5. ... and remove the front wheel mudguard with the car.


6. Remove the clamp and remove the upper cap fixing the fender liner to the wing.	7. Remove the retaining clips and remove the caps of fastening the fender liner to the bumper.


8. Remove the screw front ...	9. Screw the top ... ...


10. ... and the two screws securing the rear wheel arch liner to the body ...	11. ... and remove the liner from the car.

12. Install the front wheel mudguard and its liner in the reverse order of removal.