REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Design Features
			Replacement bumpers
			Removal and installation of a mudguard and front wheel arch liner
			Removing and installing the rear wheel mudguard
			Removal and installation of a forward wing
			Removing and installing bonnet
			Door
			The trunk lid
			Removal and installation of facing the boot
			The fuel filler flap
			Seats
			Supplemental Restraint System
			Rear view mirrors
			Dashboard
			Removal and installation of the instrument panel
			Heater and air conditioning
			Interior fittings
			Replacing a windscreen
			Care body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Removal and installation of the instrument panel

You will need: a socket wrench "14", flat-blade screwdriver.

1. Disconnect a wire from the plug ?�-?� the storage battery.

3. Remove the instrument cluster (see. "Removing and installing dash").

4. Remove the lining of the tunnel floor (see. "Removal and installation of facing of a tunnel floor").

5. Remove the front passenger airbag (see. "Removing and installing front passenger air bag").

6. Remove the lower left instrument panel trim (see. "Removing and installing left lower trim dashboard").

7. Having hooked a screw-driver, remove the left trim panel of devices.

8. Remove bottom right trim panel of devices (see. "Removing and installing the right lower trim dashboard").

9. Remove the steering column shaft (see. "Replacement steering shaft").


10. Remove the two screws on the left and right mounts console dashboard to the body.	11. Remove the two screws on the left and right mounts amplifier instrument panel to the body and remove the dashboard.

12. Install the instrument panel in the reverse order of removal.