REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
			Clutch
				Design Features
				Possible malfunctions of coupling, their causes and remedies
				Removing and installing clutch
				Removal and installation of the fork and release bearing
				Replacement master cylinder clutch
				Replacement slave cylinder clutch
				Replacing the hose and pipe hydraulic drive clutch
				Bleeding clutch hydraulic drive
			Transmission
			Front Wheel Drive
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

printable version

Removal and installation of the fork and release bearing

A sign to replace the release bearing is increased noise when you press the clutch pedal.

NOTE

When you replace the release bearing because of the noise, check the condition diaphragm spring drive plate. With strong worn all the petals in contact with the bearing, replace the drive plate assembly.

You will need a flat-blade screwdriver.

1. Remove the gearbox (see. "Removing and installing transmission").


2. Remove the cover mud clutch fork.	3. Disengage the hinge with fixing both ends of the spring.


4. Remove the clutch from the plug, remove the bearing ...	5. ... and the release fork.

6. Apply a thin layer of grease the outer surface of the guide sleeve ...

Removal and installation of the fork and release bearing

7. ... and ball bearing clutch release and the release fork at the point of contact with the bearing and the push rod of the working cylinder.

8. Set the items in reverse order.

« previos page
Removing and installing clutch

next page »
Replacement master cylinder clutch