printable version
Generator
Open circuit in the generator input (P2502) The PCM believes that the generator output voltage - above 17 V, and the voltage at the positive terminal of the battery - below 11 V.
No signal generator output voltage (P2503) The PCM generator requires a current of 20 A, and believes that the generator output voltage below 8.5 V when the engine is running.
Overcharging the battery (P2504) The PCM believes that the generator output voltage - higher than 18.5, or the voltage at the positive terminal of the battery - above 16 during engine operation.
Bus fault CAN (U0073) CAN controller is damaged.
The PCM does not receive signals from the antilock brake system (U0121) The PCM does not receive a signal from the control unit Anti-lock braking systems.
|