add to favorites

REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks

Mazda 3

Home

Mazda
	3
		Operation and maintenance of car
		Engine
		Transmission
		Chassis
		Steering Gear
			Overview
			General checks
			Working with a steering operation
				Precautions with the system of passive safety (SRS)
				Removal, check and installation of the steering wheel and steering column
				Disassembly of the steering mechanism and steering rods
					Dismantling steering rod
					Dismantling the pinion shaft and housing
					Dismantling of the upper bearing and seals
					Dismantling the gland inner guide
				Check the steering gear and steering rods
				Removing and installing power steering pump
			Tables
		Brakes
		Onboard electric
		Body

Hit Counter by Digits

printable version

Dismantling steering rod

The components of the steering gear and steering rods

Fig. 5.16. The components of the steering gear and steering gear: 1 - hydraulic piping; 2 - tie rod end; 3 - lock nut; 4 - a collar of a protective cover; 5 - band clamp protective cover; 6 - a protective cover; 7 - Tie Rod; 8 - a washer; 9 - lock nut (adjustment cap); 10 - adjusting cover; 11 - a spring stop rail; 12 - rail fence; 13 - a bolt; 14 - the gear shaft and the housing; 15 - the gear shaft; 16 - a sealing ring; 17 - a lock ring; 18 - a control valve; 19 - O-ring; 20 - the gear shaft; 21 - the valve body; 22 - upper bearing; 23 - gland; 24 - the return line; 25 - the valve body; 26 - the holder; 27 - a sealing ring; 28 - U-shaped seal; 29 - foot ring; 30 - steering rack; 31 - O-ring; 32 - a sealing ring; 33 - gland; 34 - inner rail; 35 - the case of the steering mechanism; 36 - Rubber Bearing

Remove the parts in the order instructions on the figure 5.16.

Release the puck.

Removing the steering rod

Fig. 5.17. Removing the steering rod

Remove the tie rod (Fig. 5.17).

Removing the locknut

Fig. 5.18. Removing the locknut

Remove the lock nut using special tool (Fig. 5.18).

Removing the adjustment cap

Fig. 5.19. Removing the adjustment cap

Remove the adjustment cap (Fig. 5.19).

« previos page
Disassembly of the steering mechanism and steering rods

next page »
Dismantling the pinion shaft and housing

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.