add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Overview
General checks
Working with a steering operation
Precautions with the system of passive safety (SRS)
Removal, check and installation of the steering wheel and steering column
Disassembly of the steering mechanism and steering rods
Dismantling steering rod
Dismantling the pinion shaft and housing
Dismantling of the upper bearing and seals
Dismantling the gland inner guide
Check the steering gear and steering rods
Removing and installing power steering pump
Tables
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Dismantling the pinion shaft and housing



Removing housing
Fig. 5.20. Removing housing




Hold the pinion shaft, as shown in Figure 5.20, remove the casing and the pinion shaft.

NOTE
If the gear shaft can not be removed by hand, use a press.


Removing the pinion shaft
Fig. 5.21. Removing the pinion shaft


Pull gear shaft from the valve body as shown in Figure 5.21.

Removing retaining ring gear shaft
Fig. 5.22. Removing retaining ring gear shaft


Carefully remove the retaining ring, trying not to damage the pinion shaft.




« previos page
Dismantling steering rod		 next page »
Dismantling of the upper bearing and seals

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.