 printable version
Removal and installation of the oil control valve (OCV) (L3)
Disconnect the negative battery cable. Remove the plug hole plate. Remove the high-voltage wire. Disconnect the connector of the oil control valve (OCV). Measure the resistance between terminals A and B using an ohmmeter. Remove the ventilation hose. Remove the cylinder head cover.
| Fig. 2.102. Comp powertrain dismantled when removing the timing chain drive: 1 - the cylinder head cover; 2 - fixing the crankshaft pulley bolt; 3 - crankshaft pulley; 4 - the water pump pulley; 5 - idler belt; 6 - the rubber engine mount bracket and ?��3 engine ?��3; 7 - the front engine cover; 8 - front oil seal; 9 - chain tensioner; 10 - tensioner arm; 11 - chain guide; 12 - chain valve timing; 13 - seal; 14 - chain tensioner for oil pump; 15 - directing the chain oil pump; 16 - an asterisk of the oil pump; 17 - the chain oil pump; 18 - the camshaft sprocket
|
| Fig. 2.116. Removal of the oil control valve (OCV): 1 - Managing the oil valve (OCV)
|
Install in the reverse order of removal.
| 
