Rear axle and driveshaft

9.1. Removing and installing rear axle

9.1.1. For models without ABS

9.1.2. For models with ABS

9.1.3. Disassembly of the rear axle

9.2. Drive half-line

9.2.1. Removal and installation of semiaxes

9.2.2. Dismantling of the half-line

9.3. Cuff pinion

9.4. Checking the oil level in rear axle housing and the replacement of oil

9.5. The propeller shaft

Depending on the modifications on the car set different types of rear axles. It is necessary to take into account the differences between versions with ABS, and without it, which is especially important when removing and installing the bridge. Corresponding models and established bridges:

208D and 212D, 901 and 902 series - the designation of the bridge HL0 / 14-1,7 (741.407);

308D and 312D, 903 series - HL0 / 15-2,2 (741.408);

412D, 904 series - HL0 / 3,2 (741.130).

The design of suspension bridges of different types of the same - leaf springs with hydraulic telescopic shock absorbers.