|
|
 printable version
Memory Seat, steering wheel and outside mirrors
Management is in the doorway.
1 - Memory button
2 - position switch
Use the memory is recorded to the memory selected individually Seat.
From the driver's seat in addition to the position stored in memory position of the steering wheel and outside mirrors.
For maximum 3 keys near the driver's seat has a memory cell 3, respectively. The function stored in memory, depending on the key can be switched on and off (see. ?�SETTING KEY-DEPENDENT?� (SETUP - depending on the key), Section multifunction steering wheel, universal display).
Memory write
The key in the ignition switch is in position 1 or 2 or open the corresponding door.
The seat is set to the desired position. For this position the driver's seat make a further adjustment of the position of the steering wheel and outside mirrors.
(Adjusting the exterior mirrors discussed in section steering wheel, mirrors).
(Steering wheel adjustment discussed in the section steering wheel, mirrors).
Position switch (2), turn to the desired memory.
Press and release the memory button (1) and 3 seconds hold the position switch (2).
Calling from the memory
Position switch (2), turn to the desired memory and press it.
For security reasons, the process of adjusting the position immediately interrupted if a positional button is released.
From the lying position, you must first lift up the seat back, and then call the position from memory. Otherwise, the seat may be damaged.
|
|
