Removing and installing electric fan heater or air conditioner

1. Disconnect the negative (-) cable of the battery when the ignition is off. You must first remove the air filter box of the passenger compartment.

Before disconnecting the cable, find out the radio security code, if any, address to Section Replacement of the battery.

2. Remove the cover under the glove compartment, refer to the appropriate section.

3. Disconnect the connector (1) and remove the wire from the holder (2).

4. Remove the 5 screws (arrows in the illustration) and remove the bottom cover of the housing with an electric motor and fan impeller.

Do not put the electric fan impeller.

5. Remove the plug (3) and remove the retaining bolt under the cap.
6. Remove the motor with the impeller from the casing.

1. Installation is performed in reverse order of removal.
2. Attach a weight cable (-) battery when the ignition is switched off. Replace the cabin air filter box. If necessary, enter the code for the radio and set the time on the clock.