|
|
 printable version
Removal and installation of the sensors conditioner
The sensors provide operation of the automatic control system of air conditioning.
Humidity sensor
Withdrawal
|  | Humidity sensor located in the intake air passage. |
1. Remove the filter housing, refer to Section Replacing the cabin air filter / charcoal filter air purification.  | 2. Strongly turn the humidity sensor (1) counterclockwise and remove it from the air inlet channel (2). |
3. Disconnect the connector (3) of the sensor. At the same time, make sure that the wire does not slip back into the box unit. |
|
Setting
Installation is performed in reverse order of removal. This sensor must be fixed clearly.
Multifunction sensor
Air conditioning with automatic comfort
The device is installed under the Water Collector, looking in the direction of the left next to the air intake duct.
Withdrawal
Setting
Installation is performed in reverse order of removal. This sensor must be fixed clearly.
Solar sensor
Air conditioning with automatic comfort
Withdrawal
| 1. Open the hood and remove the grate front spoiler, address to Section Removal and installation of gratings spoiler.
2. Disconnect the sensor connector under the front spoiler grille and disconnect the sensor from the holder. |
|
Setting
Installation is performed in reverse order of removal. This sensor must be fixed clearly.
|
|
