REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (W203, 2000 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W203
		Introduction
		Instruction Manual
		Routine maintenance
		Engine
		Cooling and heating
		The power supply system and release
		Electric motor
		Manual gearbox
		Automatic Transmission
		Coupling and power shafts
		Brakes
		Suspension and steering
		Body
			Care and exterior equipment Body
				General information and safety measures during the bodywork
				Cleaning and Maintenance
				Repair minor damage to body panels
				Repair of considerable damages of a body
				Damage as a result of the windshield stones hitting
				Replacing the wiper blades
				Removal and installation of the jet washer windscreen
				Removal and installation of the jet rear window
				Removing and installing windscreen wiper arm
				Removing and installing rear window wiper arm
				Removing and installing sump
				Removing and installing bonnet
				Removal and installation of facing the hood
				Adjustable hood
				Removing and installing bonnet
				Disconnecting the cable from the bonnet
				Removal and installation of gratings spoiler
				Removing and installing bumper
				Removing and installing rear bumper
				Removal and installation of a forward wing
				Removing and installing protective strips on the wing
				Removal and installation of the protective strip on the bumper
				Removing and installing protective strips on the door
				Removal and installation of a forward wing locker
				Removing and installing the rear of the wing locker
				Removing and installing front door
				Adjusting the door
				Removing and installing the front door facing
				Removal and installation of the triangular plates
				Removal and installation of the outside door handle
				Removal and installation of facing the outside rearview mirror
				Removal and installation of an external mirror
				Removal and installation of glass mirrors
				Removing and installing rear lid
				Removal and installation of facing the boot lid
				Removing and installing the luggage compartment striker
				Removing and installing tailgate
				Removal and installation of the lock mechanism tailgate
				Removal and installation of the cylinder of the lock of the trunk and tailgate
				Removing and installing tailgate
				Adjusting tailgate
				Removal and installation of facing tailgate
				Removal and installation of facing tailgate
				Removing and installing rear spoiler
				Removal and installation of covers of the cargo hold
			Salon Equipment
		Onboard electric

printable version

Removal and installation of gratings spoiler

Withdrawal

PERFORMANCE ORDER

1. Open the hood and set it upright.

2. Remove the three bolts (1) and close the hood.

3. Place a plastic wedge rear spoiler grille (2) and disconnect it from the clamp holder (1) in the hood.

4. Remove the grille with the hood spoiler.
5. Disconnect the cable and water hose from the holder.
6. Remove the windshield washer nozzles, refer to Section Removal and installation of the jet washer windscreen.

Setting

PERFORMANCE ORDER

Installation is performed in reverse order of removal.

« previos page
Disconnecting the cable from the bonnet

next page »
Removing and installing bumper