REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Automatic Transmission
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
			Specifications
			Front suspension
			Rear suspension
			Steering
			The suspension geometry
				Corners of installation of wheels of the car - the general information
				Adjusting the convergence of front wheels
				Determination of the required amount of run-out
				Check and adjustment of limiting rotation angles of the front wheels
				Check the value of the wheelbase
		Body
		Onboard electric
		Wiring

Determination of the required amount of run-out

Removal of the first control measure when determining the overrun

1 - Front axle
2 - The lower edge of the frame
3 - Bolt trailing arm

Removing the second control measurement when determining the overrun

4 - Rear axle
5 - Beam frame
6 - Bolt trailing arm

PERFORMANCE ORDER

Measure the distance between the center of the bolt (3) longitudinal arm on the front axle (1) and the lower edge of the frame (2).
Measure the distance between the center of the bolt (6) of the trailing arm on the rear axle (4) and the lower edge of the beam (5).
Using the corresponding nomogram (see. Specifications), determine the desired value overrun determined the travel suspension springs.