REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Automatic Transmission
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric
			general information
			Mounting blocks and control modules
			Switches
				Removing and installing steering column switch
				A group of switches on the instrument panel to the left
				Removal and installation of the handle switch and actuator drive position correction block headlights
				Removal and installation of assemblage of the upper group of switches of the dashboard console
				Removal and installation of the switch panel locking differentials
				Removing and installing power window switch panel driver's door
				Removing and installing panels overhead console
				Removal and installation of the instrument cluster
			Drive motors, sensors
			Signal & Lighting
			System of additional safety (SRS)
			Audio, navigation and mobile phone
		Wiring

Removal and installation of assemblage of the upper group of switches of the dashboard console

Details of installation of the assembly of the upper group of switches of the dashboard console


2 - Screws 3 - Connections	N72 / 1 - Assembly of switches

PERFORMANCE ORDER

Remove the trim panel sections of the dashboard console (see chap. Body).
Disconnect 2 (model manufacture 09.30.01) / 3 (models of release since 09/30/01) connector (3) wiring.
Remove the mounting screws (2) and remove the upper assembly of switches (N72 / 1).
Installation is in the reverse order.
Finally, make the DTC reading and clearing of system memory on-board self-diagnostic scanner using STAR DIAGNOSIS (6511 1801 00) (see chap. Systems of an electric motor).