Lift the front of the car and put it on the stand. Remove the front-wheel drive, noting their position relative to the hub. Evacuate the syringe of the brake fluid reservoir. Use a screwdriver to slightly drown the piston in the cylinder of a support. Remove the bolts guide the brake pads to the steering knuckle
(Fig. 7.7). Remove the caliper from the brake hose fitting, trying to prevent fluid leakage. Remove the caliper guide pads and brake shoes assembly. Remove the brake pads. Check the technical condition and clean all parts.
Install in reverse order of removal. After installation, bleed the brake system.
