REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Patrol (from 1988 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Patrol
		Introduction
		Troubleshooting
		Adjustment and routine maintenance
		Engine
		System of cooling, heating and air conditioning
		The power supply system and exhaust
		Systems for reducing emissions
		Systems of an electric motor
		Transmission
		Clutch
		Brakes
		The front and rear axles, chassis and steering
			Front axle and suspension
			The front suspension spring type
			Front suspension on helical springs
			Rear axle and suspension
			Rear suspension spring type
			The rear suspension on helical springs
			Steering
				Initial inspection
				A simple check and adjustment
				Removing and installing steering wheel
				Service Steering
				Removal and installation of the flexible coupling of the steering shaft
				Service assembly steering
				Removing and installing the steering pump
				Service components of the steering gear
				Removing and installing steering damper
				Service idler arm tie rod
				Corners of installation of forward wheels (the geometry of the front suspension and steering gear)
		Body
		Onboard electric

Removal and installation of the flexible coupling of the steering shaft

Withdrawal

PERFORMANCE ORDER

Disconnect the negative wire from the battery.
Quick-drying paint mark the position of the flexible coupling to the steering shaft and steering mechanism.
Give tightening bolts flexible couplings (see para. Accompanying illustration).

1 - Bolts
2 - washers
3 - Coupling

Open slot coupling with a screwdriver with a wide tip.
Slide the flexible coupling to the side of the steering wheel and remove it from the vehicle.

Setting

PERFORMANCE ORDER

Before installation, check the condition of the rubber element and the flexible coupling splines. If necessary, replace.
Achieve combination caused during the dismantling of the landing labels, then tighten the retaining bolts to 39 ÷ 49 Nm.