Eliminating minor scratches

If you scratch the surface and does not affect the metal panels, repair it is made extremely easy. To remove loose paint particles and wax coating lightly rub the scratched area of fine grinding paste. Rinse the treated area with clean water.

Small brush paint scratch paint used for the outer coating surrounding body panels. Continue to apply paint layer by layer until it is inside the crack surface reaches the level of the surrounding surface of the panel. Give the new paint to polymerize for at least two weeks, then grind the transition surface flush with the rest of the panel with a very fine sanding paste. Finally, coat the surface treated with wax.

If the scratch has penetrated through the paint to reach the metal panel and cause it to corrode, it should use a different technology renovation. Penknife from scratch scrape the rust powder, then treat the surface inhibitory paint to prevent corrosion development in the future. Rubber or nylon applicator cover the damaged area treated filler glossy type. If necessary - which is especially useful for narrow putty scratch - for the formation of very fine filler paste can be diluted with a solvent. Before glyantsovochnaya plaster hardens within the scratches wrap fingertip smooth cotton cloth. Then, moistened finger in the solvent quickly slide it along the plastered surface scratches. This will make the surface slightly concave. Now, after hardening putty treated scratch can be colored in accordance with these instructions.