 printable version
Front bumper
Removing the front bumper spend in the following order: - Lift the front of the car and establish on reliable support;
| Fig. 10.3. Details of the grille and mounting: 1 - pad; 2 - pad (connected to the grid snap, modifications GTI); 3 - grille to modify the GTI; 4 - factory emblem (snap set); 5 - grille; A - site of attachment screws grille
|
- Using a screwdriver to remove the screws Phillips tip in areas "A" (Fig. 10.3) securing the grille. If installed on the grid overlay 1, carefully remove them with a screwdriver, hooking onto the plastic clips;
| Fig. 10.4. Fixing mudguards in a niche of the front wheel: 1, 2 - self-tapping screws; 3 - a nut
|
- Disconnect fender mudguards from the bumper (Fig. 10.4), and note that the assembly will require new plastic nut 3;
| Fig. 10.5. Details of the front bumper and mounting: 1 - bumper; 2 - lock; 3 - buffer; 4 - the bumper frame; 5, 9 - screws, 5 Nm; 6 - gasket; 7 - guide plate; 8 - spoiler; 10 - cap
|
- Unscrew the top three 5 (Fig. 10.5) and five lower bumper mounting screws 9; - Disconnect the electrical connectors from the front direction indicators and fog lights (if fitted); - If the vehicle equipment provided headlight glass washers, remove them; - Holding the edge of the bumper attachment points on the body with the help of an assistant, carefully remove it forward. Installing bumper is made in reverse order of removal.
| 
