 printable version
The engine management system Simo
| Fig. 2.51. Locations KSUD Simos on the car: 1 - absorber bleed solenoid valve; 2 - measuring airflow; 3 - sensor connector oxygen content in the exhaust gases; 4 - the throttle body; 5 - the controller; 6 - nozzle injection system; 7 - the fuel pressure regulator; 8 - the ignition coil; 9 - the tachometer sensor; 10 - knock sensor connector; 11 - connector with center tap; 12 - the gauge of frequency of rotation of the crankshaft; 13 - sensor connector engine speed; 14 - the ignition distributor; 15 - coolant temperature sensor; 16 - the gauge of detonation; 17 - connection with "weight"; 18 - the intake air temperature sensor; 19 - absorber
|
KSUD Simos mounted on the engine AGG release of the 1995-1996. and includes a similar system Digifant subsystem control fuel injection control subsystem and the ignition timing. Accommodation units KSUD Simos in the engine compartment of a vehicle shown in Fig. 2.51. The components of the fuel injection control subsystem KSUD Simos shown in Fig. 2.52, 2.53.
| Fig. 2.52. The components of the fuel injection control subsystem KSUD Simos (with 10.94 g): 1 - distribution line; 2 - Bolt: M6, 10 Nm, M8, 20 Nm; 3 - a clip; 4 - ring seal section; 5 - a pressure regulator; 6 - a fuel injector; 7 - a tip; 8 - to the brake booster; 9 - the inlet manifold; 10 - temperature sensor; 11 - an arm; 12 - to the expansion tank; 13 - the cylinder head; 14 - to the solenoid valve; 15 - throttle position sensor; 16 - a lining; 17 - to drain the fuel line; 18 - to the pressure fuel line
|
| Fig. 2.53. Locations KSUD Simos on the car: 1 - absorber bleed solenoid valve; 2 - measuring airflow; 3 - sensor connector oxygen content in the exhaust gases; 4 - the throttle body; 5 - the controller; 6 - nozzle injection system; 7 - the fuel pressure regulator; 8 - the ignition coil; 9 - the tachometer sensor; 10 - knock sensor connector; 11 - connector with center tap; 12 - the gauge of frequency of rotation of the crankshaft; 13 - sensor connector engine speed; 14 - the ignition distributor; 15 - coolant temperature sensor; 16 - the gauge of detonation; 17 - connection with "weight"; 18 - the intake air temperature sensor; 19 - absorber
|
Fuel injection control subsystem includes the following major components: - Controller mounted behind the backboard front end provides a fuel injection control and ignition timing based on the information emitted by the sensor system; - Submersible type fuel pump mounted within the fuel tank; - Intake air temperature sensor is mounted on the housing of the air filter; - The coolant temperature sensor is located on the housing for supplying coolant and cylinder head; - The air flow sensor mounted on the housing of the air filter; - The throttle body is located on the intake manifold and includes a throttle control idling and potentiometric throttle position sensor.
| 
