REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 4
		Instructions
		Engine
			Gasoline engines
				Technical specifications
				Removal and installation of the bottom mudguard of a motor compartment
				Engine 1,6- / 1,8-I
					Powertrain
					Toothed belt
					The cylinder head engines
						Withdrawal
						Preparation for the installation of the head
						Setting
						Checking the hydraulic valve lifters
						Repair of the cylinder head
							Dismantling
							Cleaning and checking
							Assembly
				The engine 1,4-I
				Engine-I 2,3-VR5
				Compression check in engine cylinders
				Removing and installing V-ribbed belt
				Engine oil recommendations
				Circuit of motor oil
				Checking oil pressure and oil pressure sensor
				Removing and installing oil pan
				Starting the engine after major repairs
				Troubleshooting Engine
				The basic malfunctions of system of greasing
			Diesel engines
		Cooling system
		Fuel System
		Exhaust system
		Ventilation and heating system
		Coupling
		Transmission
		Suspension brackets and power shafts
		Steering
		Wheels and tires
		Brakes
		Body
		Electrical equipment and wiring

Dismantling

PERFORMANCE ORDER

1. Remove the cylinder head.
2. Unscrew and remove the inlet and exhaust manifolds.
3. Remove the camshafts and hydraulic tappets.
	4. Squeeze the order of the valve springs and remove the special tool crackers fixing stubborn upper spring seat.
	5. Remove the top plate and the valve spring.
	6. Remove the internal valve spring.
	7. Remove the outer valve spring, taking care not to damage the valve stem.
	8. Remove the valve from the cylinder head from the side of the combustion chamber.
9. Remove the valve stem seals.
	10. Remove the bottom plate of the valve spring.
	11. Place the valve kits in plastic bags and label them for installation in its place.