 printable version
Changing wheels
A warning  Alloy wheels protected against corrosion by a transparent varnish. Be careful not to damage the paint. When the coating is damaged, the disk cover layer of varnish.
Galvanized wheel bolts can be applied only on steel stamped disks. Alloy wheels are mounted only chrome wheel bolts, which has a rotating conical washer. This washer established under a head bolt, protects a disk surface at a tightening of bolts. Before screwing, do not grease the threads of bolts fastening wheel. The standard wheel bolts are sized - M14h1,5h27,5. The size of the head under the key 17 mm. Tightening wheel bolts produce evenly in stages in diagonal sequence. Torque wheel bolts 120 Nm.
| PERFORMANCE ORDER |  | 1. Remove the wheel covers. To do this, use a crowbar and wire bracket of a set of tools. Wire bracket is mounted on the hood or the hole edge. Pass through the mount bracket and pulling the wheel mount, remove the cap. | | 2. On the car standing on the ground, tighten the hand brake and loosen the wheel bolts. | | 3. Lift the proper side of the car and fix on supports. |  | 4. Remove the upper bolt of the wheel. |  | 5. In its place, screw in the adjusting pin. Using the adjusting pin facilitates installation of a spare wheel. | | 6. To eliminate the "kick is" drives the hub before installing the wheel, apply a thin layer of grease on the collar of the hub centering disc wheels. |
|
| 
