| 1. Turn off the ignition and remove a wire of weight from the accumulator. |
| 2. Isolate the earth wire in order to avoid accidentally connecting it to the battery. |
| 3. Set the front wheels for movement directly forward. At the same time the steering wheel should be established in the middle position. |
| 4. Turn the steering wheel 90 ?� counterclockwise. |
| 5. Unlock the steering column, see. Fig. Unlocking the steering column. |
| 6. Move the steering wheel all the way over and down. |
| 7. Secure the position of the steering wheel. |
| 8. Release the airbag, which on the back of the steering wheel, insert the screwdriver blade length of 175 mm in the hole of the steering wheel. See Figure. Releasing the airbag in the steering wheel with three spokes and rice. The release of the airbag in the steering wheel with four spokes. |
| 9. Move the screwdriver handle upwards blade screwdriver to push down the latch 10 and release the locking clip 3 airbags. Move the airbag from the steering wheel. |
| 10. Turn the steering wheel to 180 ?� clockwise and release the same way from the second airbag retainer clip. |
| 11. Install the steering wheel to the center position. At the same time the wheel will be mounted for rectilinear movement. |
| 12. Remove the single-contact electrical connector airbags. |
13. Remove the airbag.
A warning  Do not change the position of the steering wheel.
|
