printable version
Adjusting the camber of the rear axle
| Fig. 4.34. Nut screw connection of the upper arm with subframe
|
Loosen the nut and the screw connection of the upper arm with subframe (Fig. 4.34). Adjust camber by turning the hexagon of the eccentric bolt.
NOTE The maximum adjustment range is 90 ?� to the left or right from the center position. |
To do this, use a ring spanner. When using the box wrench, tighten the nut to a torque of 65 Nm.
After tightening the nut A (Fig. 4.35) again, check the camber.
|