 printable version
Adjust the bonnet
Remove the grille.
If we now loosen the bolts 1, you can change and adjust the bonnet clearances (Fig. 8.25). Tightening torques: bolts 1 - 12 Nm. Adjust the hook lock.
Adjustable stops Loosen the clamping screw 1 so as to become visible rubber stop.
NOTE Description of adjustment is shown to the left stop. Adjusting the right stop is carried out similarly. |
| Fig. 8.26. Fixing the pusher and the clamping screw
|
Then remove the locking plunger 2 of the adjustable stop (Fig. 8.26).
| Fig. 8.27. Setting the clearance between the pusher and the clamping screw
|
Close the hood, pushing it slightly in the middle, but the lock snaps. Re-open the hood.
| Fig. 8.28. Driving adjust the position of the clamping screw
|
Clamping screw 1 adjustable stop screw to a depth of a - 25 mm (Fig. 8.28). Check the adjustment.
| 
