REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Passat B6
		Operation and maintenance of car
		Engine
			Overview
			Mechanical (engine capacity of 1.6 liters)
			Lubrication system
			Cooling system
			Fuel Injection System
			The mechanical part (petrol engines of 2.0 liters)
			Lubrication system
				Checking oil pressure and oil pressure sensor
				Removal and installation of the oil filter
				Draining the oil filter housing
				Refitting the oil sump - engines BLX, BLY, BLR
				Removal of the oil pump driven balancer shaft
				Installation and adjustment of the oil pump driven balancer shaft
			System ohlazhdeiya
			Fuel system
			Injection system
			System of release of gases otrabotavschih
			Ignition system
			The mechanical part (diesel engines of 2.0 liters)
			Lubrication system
			Cooling system
			Fuel system
			Turbocharging turbo running on exhaust
			The direct injection diesel
			Exhaust
			Tables
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
		diagrams

Removal of the oil pump driven balancer shaft

Fig. 2.173. Order of a tightening of bolts of fastening of the oil pallet

Remove the oil pan.

Fig. 2.174. Locking tabs

Remove the chain cover. If necessary, release the locking tabs with a small screwdriver through the holes (Fig. 2.174).

Fig. 2.175. Untwisting sprocket chain drive oil pump

Remove the bolt sprocket chain drive oil pump (Fig. 2.175). Hold can at central bolt vibration damper.

ATTENTION

Balancer shaft drive sprocket loosened prohibited.

Fig. 2.176. The weakening of the strap tensioner

Loosen the tensioning rail with a screwdriver and fix it with an Allen wrench 1 Wrench 3 mm (Fig. 2.176).

Fig. 2.177. Hanging Chain

Remove the oil pump sprocket and chain to hang on the drive balancing shaft (Fig. 2.177).

Fig. 2.178. Bolts drive balancing shaft

Remove the screws from the drive balancing shaft edges to the center and remove it (Fig. 2.178).

Remove the intermediate plate.