 printable version
Roller speedometer
A warning  Improper positioning of the speedometer roller will cause noise in the speedometer swings from side to side of the speedometer and the damage roll.
Withdrawal
| PERFORMANCE ORDER | | 1. Reach under the instrument panel. Pull the plastic grip roller speedometer on the instrument panel (to compress the side edges) and remove the roller from the instrument panel. |  | 2. Unscrew the clutch (1) roller speedometer in the hood, the expansion near the brake fluid reservoir and remove the roller with a rubber seal (2) of the transverse wall. | | 3. Roller speedometer is divided into two parts. Unscrew the lower part of the roller on the gearbox drive from the right axle housing to the engine. | | 4. Note the location of the roll of the speedometer in the hood. | | 5. Release the speedometer roller in the hood of the clips, if necessary, cut the cable clamps. |
|
Setting
| PERFORMANCE ORDER | | 1. Insert the speedometer roller toward the passenger compartment, press in the rubber seal in the hole. | | 2. Insert the roller into the speedometer and secure. |
A warning The roller must be stalled. Reliability fixing roller check by pulling on it.
| | 3. Unscrew together in the hood of the roller. Check the correct position of the roller in the hood. | | 4. Screw the roller to the gearbox. |
|
|
