|
|
 printable version
Backdoor
Rear tailgate 1. Rear door
2. Phillips screws, 20 Nm
3. Hinge
4. The sealing plate
5. Remote plate
6. Hex nut
7. Drive lock
8. The guide pin | 9. Screw 10 Nm
10. Stopper
11. Screw, 20 Nm
12. Link
13. Castle
14. Allen screw 20 Nm
15. The hollow pin
16. Cylinder lock |
Withdrawal
| PERFORMANCE ORDER |  | 1. Remove the inner liner (2), for it to unscrew the Allen key clip (3). On the subsequent assembly of the clips are not screwed, but simply embed (1 - door). | | 2. Disconnect the rear window, number plate lighting, if there is a wiper motor and central locking and pull out the wiring of the trunk lid. | | 3. Support the cover or use to support assistance. | | 4. Disconnect the gas spring tailgate. | | 5. Unscrew the Phillips screws and remove the hinges of the tailgate. |
|
Setting
| PERFORMANCE ORDER | | 1. Install in reverse order. | | 2. Cross hinge screws tightened to 20 Nm. |
|
|
|
