 | 1. Unscrew the 3 cross-head screws (2). Carefully pick up and remove the grille (1) (3 - spacer nut). |
| 2. Disconnect the hose from the water jets wash the glass to release the clip and pull out of the bonnet. |
 | 3. Applies to vehicles with silencers on the cover of the hood: open the hood, turn the clip (1) through 60 ?� and remove. Remove silencer (2). |
| 4. If available, disconnect the lamp lighting the engine compartment. |
 | 5. Remove the lock cover (1). To do this, unscrew the cross-head screws (3) and Allen screw (2), remove the lock and pull the flexible cable from the drive of the lock cover. |
| 6. If the bonnet will be installed again, felt-tip pen to outline the hinge screw heads, this will facilitate the assembly. |
| 7. Unscrew the hex screws hinges right and left, while holding with assistance bonnet. Lay first the left and right cloth to avoid damaging the paintwork. |
| 8. Remove the bonnet. |
