 printable version
Front seat
Fastening the seat without the frame 1. Allen screw
2. Allen screw
3. The adjustment mechanism | 4. Tires
5. belt buckle |
Depending on the equipment installed various front seats:
- Rotating seat without the frame;
- Non-rotating seat with or without a frame;
- Adjacent to the driver's seat can be configured as a two-seater benches or folding seats. Removing the seat without the frame (rotating or non-rotating)
| PERFORMANCE ORDER | | 1. Unscrew the Allen screw (2) (key size 5 mm) of the inner rail seat (see. Fig. Fastening the seat without the frame). | | 2. Release the seat adjustment mechanism and remove the rest of the guide (3) in the direction of the arrow. | | 3. When removing from the guide (4), slips and the seat belt buckle (5). |
A warning  When installing tighten Allen screw torque of 15 Nm.
|
|
Removing the folding passenger seat
| PERFORMANCE ORDER | | 1. Unscrew the 4 hex screws and remove the folding seat. | | 2. When installing tighten the screws to 45 Nm. |
|
Removing individual seats to the frame | PERFORMANCE ORDER | | 1. If present, remove the additional battery under the seat. |  | 2. Unscrew the rear screws (1). Remove the seat from the fingers (2) back. |
A warning When installing tighten hex screws to 45 Nm, the fingers 30 N ?� m.
|
|
Removing the dual passenger seat
| PERFORMANCE ORDER |  | 5 1. Unscrew the hex nuts (3). |
A warning Spacing washers (2) are installed only in machines with separate wall in order to ensure the free passage between the back seat and separate wall. Remote nut (1) is installed only in vehicles with right-hand drive. Tightening torques of the hexagon nut (3) and lock screw (4) - 45 Nm.
| | 2. Remove the passenger seat. |
|
| 
