add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volvo S40 / V40 (from 1996 to 2000, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Volvo S40 / V40
Home
 
Volvo
S40 / V40
General Information
Operation and maintenance of car
Design and specifications Engine
Engine repair
Transmission
Brakes
Front suspension and steering
Overview
Specifications
Maintenance and repair of suspension
Maintenance and repair steering
Check and backlash steering
Check and adjust the steering mechanism
Troubleshooting the hydraulic power-assisted steering
Replacing ignition
Replace the steering column lock
Replacing the tie rod with ball joint
Replacement of a protective cover of steering draft
Removal and installation of the airbag module in the steering wheel
Rear suspension
Engine Management System Fenix 5.1
Electric. Wiring and components
Body
Diagrams
 


Hit Counter by Digits


print page printable version

Replacing ignition



To replace the lock:
- Disconnect the negative terminal of the battery;
- Set the steering wheel in the lowest position;
- Remove the bottom cover of the steering wheel;
- Turn the ignition key to position 1;

Forced off punch stopper locking cylinder
Fig. 7.30. Forced off punch stopper locking cylinder


- Press the stop locking cylinder 2-mm punch (Fig. 7.30);
- Remove the ignition;
- Insert the key in a new lock;
- Turn the ignition key to position 1;
- Press the stop punch and insert the cylinder into the ignition lock;
- Check the operation of the lock.




« previos page
Troubleshooting the hydraulic power-assisted steering		 next page »
Replace the steering column lock

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.