The front room lamp

Replacing the lamp

Click on the diffuser 2 (Fig. 18.54) back and a blade screwdriver, remove the front part of the lens from the body and remove it.

3 Remove the bulb (12 V, 10 W) of the spring contacts.

Install the new lamp and check that it is firmly held contacts. If the lamp pins weakened bend them.

Removing the lamp housing

Thin blade screwdriver to pry the casing 1 Front interior light and remove it.

Disconnect the electrical connectors 4 and 5 on the front interior light.

Installing the lamp housing

Installation is made in sequence, return to removal.