printable version
Rear bumper
| Fig. 16.20. Rear bumper: 1 - a bolt, 23 Nm; 2 - shock absorber; 3 - amp; 4 - lower pad; 5 - the screw; 6 - rear bumper; 7 - the side rail; 8 - bolt 1 Nm; 9 - a niche facing the rear wheel; 10 - a nut with a flange 6 Nm; 11 - a nut with a flange 6 Nm; 12 - Seal
|
NOTE To access the bolt 10 is necessary to remove the interior trim of the trunk. |
Withdrawal 5 Remove the screws and remove the bottom cover from the rear bumper. Open the trunk, remove the interior trim of the trunk and remove the nut 10. Unscrew the bottom of the facing of a niche of the rear wheel, take it to the side and remove the nuts 11. From the trunk unscrew bolts of 1 fastening of a bumper. Pulling back, remove the bumper together with the beam from the vehicle.
Setting Installation is performed in reverse order of removal.
|