printable version
Checking freewheel (backlash) of the steering wheel
With an increase in the free steering wheel during difficult driving as he belatedly reacts to driver input. In addition, increased course that can not be eliminated by adjusting the steering mechanism, a malfunction of the steering (loose steering, steering gear or wear their parts). Check the play of the steering wheel on the car mounted on a flat slip coating. The backlash should not exceed 5 ?�. Backlash can determine in linear units (mm) using the formula L = (5 ?� / 360 ?�) pD, wherein L - the play of the steering wheel, mm; p = 3,14; D - outside diameter of the steering wheel mm.
For the steering wheel, an outer diameter of 380 mm, the clearance should not exceed 16-18 mm. You will need: a ruler, chalk (or wire) for the application of labels. 1. Place the front wheels in a position corresponding to rectilinear movement of the car. | | 2. Set the range so that it rests on the end of the instrument panel, and the plane of the line for the outer surface of the steering wheel rim. Without changing the position of the line, turn the steering wheel to the left until the start of the front wheels. In this position, put on the steering wheel rim label (tighten the wire). | 3. Without changing the position of the line, turn the steering wheel to the right until the beginning of the front wheels. |
4. In this position, put on the steering wheel rim a second label (tighten the wire). 5. Measure the distance between the rim labels. It should be no larger than the calculated value. If the distance (a free wheeling of a steering wheel) is greater than necessary to establish the cause and fix it.
|