REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Chevrolet
	Lanos
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
			General provisions
			Daily maintenance (EO)
			The first maintenance (1)
				Check and adjust belt drive alternator and power steering pump
				Check and adjust belt drives the air conditioning compressor
				Check the timing belt
				Replacing the engine oil and oil filter
				Clean the crankcase ventilation system
				Check hoses and connections of the cooling system
				Check exhaust system
				Leak test fuel
				Replacement of the fuel filter
				Replacing the air filter element
				Check and adjustment of drive clutch
				Checking and topping up the oil in the gearbox
				Check of protective covers of drives the front wheels
				Checking the technical condition of the front suspension parts on the car
				Check of a technical condition of details of the rear suspension on the car
				Check and adjust wheel alignment
				Inspection and steering on the car
				Checking freewheel (backlash) of the steering wheel
				Leak test hydraulic brakes
				Check the wear of brake pads, discs and drums
				Check the operation of the brake servo
				Check braking efficiency
				Checking the parking brake
				Service Battery
				Replacement and service of spark plugs
				Check and adjust headlights
				Grease fittings Body
				Cleaning the drainage holes
			The second maintenance (TO-2)
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Wheels and tires
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Tips novice mechanic
		Applications
		Diagrams

Check and adjust belt drives the air conditioning compressor

You will need: the keys "12", "14".


1. Press your thumb on the air conditioning compressor belt. The deflection should be 5-8 mm with a force of 100 N (10 kgf). If the belt deflection is different from the values of ...	2. ... remove the right mudguard of the engine (see. "Removal and installation of mudguards of the engine") ...


... 3. loosen the nuts of the tension roller ...	4. ... and turn the adjusting bolt Achieve the required belt tension.

5. Tighten the nut of the tensioning roller.

6. Install the mudguard of the engine.