REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Chevrolet
	Lanos
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Compression check in cylinders
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Removal, installation and Troubleshooting flywheel
			Replacement parts Seal Engine
			Cylinder Head
			Removing and installing engine
			Engine repair
			Lubrication system
			Cooling system
			Exhaust
				Design Features
				Replacement cushions suspension exhaust system
				Replacement of the basic muffler
				Replacement of the additional muffler
				Replacement catalytic converter or spacers
				Replacing the front exhaust pipe
				Removing and installing Thermoscreens
			The power supply system of the engine
			The system EVAP
			Exhaust gas recirculation
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Wheels and tires
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Tips novice mechanic
		Applications
		Diagrams

printable version

Replacing the front exhaust pipe

1. Remove the three screws securing the exhaust flange on the exhaust manifold ...

HELPFUL ADVICE

The nuts securing the exhaust flange after prolonged use of "burn up" to the studs. To prevent damage to the pins loosening soak fittings liquid WD-40 (or compounds similar to it) or kerosene.

Worth every disassembly new connections to replace the nut, since the faces of nuts can be crumpled and the subsequent tightening (loosening) can be broken completely, then unscrew the nut will be very difficult.


2. ... and the three nuts securing the exhaust flange to flange catalytic converter (or the flange spacers).	3. Remove the cushion suspension system from the bracket on the receiver tube ...


4. ... disconnect the exhaust flange and converter ...	... 5. Slide the flange of a reception pipe to the exhaust manifold studs and remove the pipe.


6. Remove the flange gaskets converter ...	7. ... and the exhaust manifold.

HELPFUL ADVICE

Replace with new gaskets between the flanges of the front exhaust pipe, catalytic converter (spacers) and the exhaust manifold at each dismantling of the connection as much compress the gasket does not provide a reliable seal.

8. Install the exhaust pipe in the reverse order of removal.

« previos page
Replacement catalytic converter or spacers

next page »
Removing and installing Thermoscreens