add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Design Features
Mounting blocks
Accumulator battery
Generator
Starter
The switch (lock) of ignition
The engine management system
Lighting, light and sound alarm
Design Features
Replacing bulbs
Replacing the headlight units
Replacing electroproof headlights
Replacing a side indicator lamp
Replacing rear light
Replacement of an additional stoplight
Replacing the license plate light
Replacing courtesy light
Replacement of the trunk room lamp
Checking and replacing the steering column switch
Removal, installation and adjustment of the audio signal
Replacing windscreen wiper motor-reducer
Removal and installation of a washer of glass of a wind window
Removal and installation of the electric motor of the basic fan cooling radiator
Removal and installation of the electric motor of the additional fan cooling radiator
Heated tailgate window glass
Removing and installing cigarette lighter holder
Device combination
Switches dashboard
Replacing the control unit power windows
Car audio system
Replacement sensors and switches
Body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Design Features



Lights.
For vehicles used lens unit, combining the double-stranded lamp near and far light bulb side light and indicator lamps.
Fog lights.
On cars at the bottom of the front bumper can be fitted fog lights. Fog lights can be turned on only when the outdoor lighting.
The rear fog lamp.
Bulb rear fog light is installed in the left rear light. Fog lights can be switched on a button on the dashboard only when the outdoor lighting.
Direction indicators.
Indicator lamps are installed in the block headlights, rear and side lights. The turn signals include a left shift paddles (lamp on one side, depending on the position of the switch) or the hazard switch (all the lamps at the same time).
Electrocorrector headlights.
On cars establish Electrocorrector headlights, allowing to change the direction of the light beam headlights in a vertical plane, depending on the vehicle load.

HELPFUL HINTS
If the lights were suddenly the lights dim, and when the turn signal is flashing parking light bulb, restore contact "mass" wire to the body.
Make it a habit to regularly change the lamp (especially head headlights). Over time, the lamp bulb becomes cloudy, lamp brightness decreases. This process is quite slow and the driver does not notice the gradual deterioration of the illumination of the road.
In recent years, more and more machines there, which lights shine like a Christmas tree, various shades of blue. This is called the word "Xenon" and considered to be very tough. No doubt, xenon headlights mounted nominally on the latest models of cars, a lot better illuminate the road, and the car with them looks much more spectacular. Not surprisingly, many are also trying to improve your car, especially now that there was a weight on the shelves "Xenon" bulbs of various manufacturing (mostly Chinese). Do not buy into the cheap stuff: These lights have nothing to do with real xenon gas discharge lamps without filaments. This is a lamp with colored glass. Light-transmitting ability of the glass is much lower than standard bulbs, the filament from fakes is usually installed out of focus, with the lamp bulb with the external showiness almost nothing illuminates only further mercilessly blinding oncoming drivers. Moreover, producers of such tubes, to offset the decrease in the luminous flux is increased in excess of their thickness. Often their installation leads to the melting of the wire insulation and damage to electrical equipment. A possible and fire. Better not to purchase it for the money, "a headache", and buy a good quality conventional lamps.
Sooner or later the lamp in the rear lights burn out. It would be easy - take a new lamp, suitable for the size of the cap and the voltage and set it in place of the fused. However, note that the rear lights are used the lamp socket with the same, but with different capacity: 5W and 21W. And this is an important detail. Do not confuse spot lamps 5 watt bulb set for side light, 21 watt - in the direction indicators and brake lights. If you set the low-power lamps in brake lights and turn indicators, other drivers simply do not see your signals in inclement weather. A powerful lamp in the "dimensions" will be very disturb drivers who travel back and annoy them. The relevant and will be relevant to you.




« previos page
Lighting, light and sound alarm
next page »
Replacing bulbs

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.