printable version
Replacing electroproof headlights
1. Disconnect a wire from the plug "minus" of the storage battery. | | 2. Remove the lens unit (see. "Replacing the headlight"). Laths or remove lights. | 3. Turn Electrocorrector (counterclockwise for the left headlight and clockwise for right headlight) ... |
| | 4. ... and pull it out, moving the ball out of engagement with the plastic lever reflector. | 5. Remove the O-ring. |
6. Set Electrocorrector in reverse order of removal. When installing make sure that the ball electroproof engages with the lever of the reflector, which remove the back cover of the lens unit and hold the lever with your finger.
HELPFUL ADVICE Connect the harness pads without installing lamp, connect the wire to the plug "minus" of the battery and check the operation electroproof: Turn dipped or main beam headlights. Turning the knob electroproof beam headlamps must be moved in the vertical direction. If you hear the sound of electroproof, and the light beam is not moved, it will likely not electroproof tip engages with the lever of the reflector. |
|