printable version
Repair gearshift
You will need: a stripper snap ring, screwdriver, piercer hammer. | | 1. Knock the ball pin mounting arm to the shaft gear ... | 2. ... and remove the pin from the cover of the gearshift. |
| | 3. Remove the shift shaft from the holes of the cover and remove the cover of the ball lever. | 4. Having hooked a screw-driver, remove the slot cover shaft seal switch. Worn, hardened or damaged, replace the oil seal. |
| | 5. Spread retaining ring ... | 6. ... and remove the axis of the gearshift lock ring, flat washer, spring ... |
| | 7. ... a second flat washer ... | 8. ... and switch. |
9. Assemble the gearshift in reverse order, replacing worn or damaged parts.
|