REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
			Manual Transmission
				Technical data
				Checking the oil level
				Changing the transmission oil
				Replacement of an oil sealing ring of a power shaft
				Replacement of a cable drive speedometer
				Removing and installing transmission
				Repair Transmission
				The gear change mechanism
				Hydraulic clutch
				The shift lever
			Automatic transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

printable version

Checking the oil level

Inspect the transmission for oil leakage. Removing the filler plug, check the oil level. If the oil is dirty, replace it.

A warning

When checking the oil level the vehicle must be in a horizontal position.

PERFORMANCE ORDER

1. Remove the oil filler cap.

2. Check the oil level, which should be near the lower edge of the threaded hole for the oil filler plug. If the oil level is low, add the required amount of oil.

3. If the oil is dirty or the viscosity is not correct, replace it.

« previos page
Technical data

next page »
Changing the transmission oil