REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
			Manual Transmission
			Automatic transmission
				Technical data
				The control lamp fault (MIL)
				Diagnostic trouble codes
				Read fault codes
				Check the transmission fluid pressure
				Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
				Check the fluid level in automatic transmission
				Check the operation of the selector lever
				Adjustment of the switch indicate the position of the selector lever
				Adjusting the servo compulsory inclusion downshift
				Adjust the line pressure
				Replacement of an oil sealing ring of a power shaft
				Replacement of a cable drive speedometer
				Removing and installing transmission
				Repair Transmission
				Lever
				Control Cable
				Repair of the selector lever
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

Adjusting the servo compulsory inclusion downshift

PERFORMANCE ORDER

1. Clean all dirt from the adjustment screw servo compulsory inclusion downshift.
2. Loosen the lock nut.
3. Twice loosen and tighten the adjustment screw tightening torque 5 N ??? m.
	4. After tightening the adjustment screw tightening torque 5 N ??? m loosen it on 3-31 / 3 turns.
5. Tighten the lock nut torque. Torque: 15-22 N ??? m
A warning Before adjusting, apply sealant DC780na thread adjustment screw servo compulsory inclusion downshift.