REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
			Technical data
			Lower arm front suspension
			Replace the lower arm bushing
			Replacement of the plug (G) of the lower arm
			Front stabilizer
			Rear strut
			Replacing the rear trailing arm bushings Rear suspension
			Replacing the rear control arm bushing (A and B) of the rear suspension
			Rear anti-roll bar
			The corners of the front axle
			Adjustment of a convergence of back wheels
			Tyre wear
			Anti-skid chains
			Runout
			Tightening the wheel nuts
			Shift of wheels
			Check withdrawal and course instability of the car
			Caring for aluminum alloy wheels
			Troubleshooting
			Diagnosis tire wear
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

printable version

Caring for aluminum alloy wheels

PERFORMANCE ORDER

1. Aluminum alloy is exposed to the harmful effects of alkali. If the car is exposed to salt from sea water or road chemicals, you must immediately wash the car with clean water, then apply a wax polish discs on all wheels to protect them from corrosion.

2. When using a pair of washing the car, do not point it to the wheels.

3. When tightening the wheel nuts with aluminum rims, follow these guidelines:

a. Clean the surface of the sleeve;
b. tighten the wheel nuts to torque tightening;
c. Do not tighten the wheel nuts by pressing the foot switch;
d. Do not grease the thread wheel nuts.

« previos page
Check withdrawal and course instability of the car

next page »
Troubleshooting