REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
			Technical data
			Electrical circuits
			Charging System
			Checking the charging circuit
			Check the voltage drop across the wire that connects the battery to the alternator
			Check of the current generated by the generator
			Check voltage release
			Generator
			Accumulator battery
			Check the specific gravity of the electrolyte
			Charging the battery
			Inspection of battery
			Starting system
			Starter
			Check and replacement of elements of the stator
			Switch the ignition lock
			Check the starter relay
			Check the ignition switch lock
			Radio
			Speakers
			Antenna
			Multifunction switch
			Sound signal
			Circuit breakers
			Device combination
			Windshield Wiper Motor
			Replacement lights and front turn signal
			Adjusting headlights
		Appendix
		Wiring

printable version

Electrical equipment

Negative ground electrical system has an operating voltage of 12 volts. Power for the system comes from the electrical lead-acid battery, which is recharged by a generator.

It should be noted that when working with any element of the vehicle's electrical wire of the negative terminal of the battery must be disconnected to prevent short circuits and / or fire.

At regular intervals check the location and fastening of wires, make sure that the wires do not grind on the other elements. If you find that any wires rub against the other elements, take the wire to the side and secure so that it does not happen again.

A warning

It is forbidden to change the polarity of the supply of various equipment and devices of electrical equipment in order to avoid failure of the semiconductor devices.
Do not disconnect and connect the battery, measuring instruments and any wires with the engine running.
It does not test the serviceability of the generator circuit on the weight of the power output.

« previos page
Troubleshooting

next page »
Technical data